Saving Picture in SD card
I have used the sample code given in the documentation, initially the SD card is not getting detected but after giving pressure to the main board, the log says "the picture is saved" , but I couldn't find it in the SD card.
Could you please check if sketch
read_write.ino(File -> Examples -> SDHCI -> read_write) works for you?
You can also check if the main board and extension board are connected correctly: https://developer.sony.com/develop/spresense/docs/introduction_en.html#_how_to_attach_the_spresense_extension_board_and_the_spresense_main_board
Tried the read_write sketch. Getting the "Insert SD card" error.
AnshumanFauzdar last edited by
@abishek-arjun this is a very common issue, carefully remove your main board from extension board and position parallelly to each other.
It might take 2-3 tries to work [DO NOT PUT EXTRA FORCE/PRESSURE ON ANY MODULE]
Do check your SD card is formatted in FAT32 format.
These steps will solve your problem