Sony's Developer World forum

    • Home
    • Forum guidelines

    Unable to recover Spresense mainboard back to factory setting

    Spresense
    2
    2
    124
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    This topic has been deleted. Only users with topic management privileges can see it.
    • S
      Stlim 0 1 last edited by

      Since I have problem on the mainboard and unable to run sketch. I tried to recover the mainboard following Sony posted procedure to recovery the mainboard back to factory settings by "recoverytool.exe". But the recovery process halt. See belowhalt print screen.png
      After reflash bootloader and reboot. The serial monitor shows below and mainboard is not working...Please advise.
      d5a301a4-c7ce-4fe0-a5f6-6e5d1837a03e-image.png

      C 1 Reply Last reply Reply Quote
      • C
        CamilaSouza DeveloperWorld @Stlim 0 1 last edited by

        Hi, @Stlim-0-1

        Can I ask you.. how long was the process halted before you disconnected the board from your computer?

        Have you tried to run the process more than once, just in case?

        If positive..
        Can you describe which issues you were having with the main board that led you to try the recovery tool?

        1 Reply Last reply Reply Quote
        • First post
          Last post
        Developer World
        Copyright © 2021 Sony Group Corporation. All rights reserved.
        • Contact us
        • Legal